500 Watt Heater Specifications

Model CZI-500F/220v

Cabinet: All Metal –22 & 24 gauge

Weight: 8.0 lbs

Dimensions: 18” x 4 3/8” x 4” (H,W,D)

Power Requirements: 230 Volt AC —500 Watt.

Power Supply: Requires isolated 12 gauge wire to fuse panel.

Chassis Safety Insulation: Exceeds all government and independent laboratory standards for safety in an installed heating appliance (a safety standard that exceeds other manufacturer’s specifications).

Internal ceramic blanket provides R45 insulation between the wall and the heater. The heater cabinet installed in the wall remains cool to the touch while delivering warm (160° F) infrared heat into the room.

Life Expectancy: CZ Infrared™ Heaters—25 years+.

Thermostat Power Requirement: None. The unit contains its own low voltage power supply for thermostat operation.

Thermostat Type: Any 12-24 volt low-voltage thermostat (not supplied).

Zoned Heat Capability: Pre-wired.  Simple two-wire contact to any zone control panel—can also accept multiple parallel hook-ups to a single low-voltage thermostat.

Safety Cut-Off: Yes.

Listed Approvals: CTUV-US & International (UL Equivalent).

Installation: Any wall with a minimum 3 ½ inches of depth.

Heat Type: Therapeutic far-infrared heat.

Heat Chamber: Copper lined for maximum ion transfer.

Heating Elements: One (1) ceramic infrared emitter 500 w.

Ceramic Life Expectancy: Rated at 40,000 hours.

Heat Output: 2,800 BTU infrared heat.

Fan System: One (1) high volume, low noise 90mm DC fan.

Frequency Hum: There is no AC 60Hz frequency hum as with other in-wall systems.

Fan Noise Level: 18 dB—practically silent.

Warranty: Limited 3 Year P & L. 5 Year—ceramic emitters.